MI-G-1-SS 7 GPM 14 LBS capacity Stainless Steel Grease Interceptor

MIFAB Series MI-G-SS sanitary powder epoxy coated inside and outside fabricated Type 304, 14 gaugestainless steel body hydro mechanical grease interceptor with flow rating of 4-50 GPM, and grease holding capacity of 8-100 LBS. Unitshall include: removable baffle assembly and cross bar, deep seal trap covered by lid, sewer gas stopper, securing bolt(s),external vented flow control fitting, internal air relief by pass, feet underneath interceptor to elevate it ½” off the ground, andsteel powder epoxy coated, non ski, rectangular gasketed lid(s). Interceptor shall be tested and certified to the P.D.I. StandardPDI-G101 and be so marked.

Used in restaurants, kitchens, institutions and other types of food processing areas where fat, oil and grease (FOG)drains with the wastewater. External flow control fitting must be installed according to manufacturer's instructions to control rateof flow into the interceptor and, therefore, the operating efficiency. Interceptor may be installed on the ground, semi recessedor flush with the floor. Single bolt lid design permits fast and easy removal of the lid for cleaning and maintenance. Standardpowder epoxy coated lid and body ensures maximum protection from contaminants. Sewer gas stopper prevents foul odors fromentering the kitchen area through the interceptor. ½” feet underneath the interceptor elevate the bottom steel plate from the wetground. Stainless steel interceptors are ideal for installations that are exposed to salt water, and / or corrosive cleaning agents.They will last longer than the typical fabricated steel interceptors.