JPF-A/TP Judo 1" Auto /Time Water Filter

Version: filter housing made of high-grade, polymer-based materials (PN 16)

including a quick-mounting device for easy installation in both horizontal and

vertical flow d irections. Equipped with a clear sight-glass which allows you to

view the filtration, soiling and backwash functions. Filtration through a stainless

steel filter, sieve size 100 microns (30-500 micron range options are also avail-

able upon request). Automatic backwash, generated by a time actuated relay

with the following available options: 4 hrs/ 8 hrs/ daily/ weekly/ monthly.

Backwash process using patented point-rotation-system with no interruption to

the water supply or filtration process. Simultaneous cleaning of the sight-glass

during the backwash process. Electronic control system with LED display indi-

cators for operation, alarm fault buzzer and manual over-ride button for back-

wash start. 120/24 VAC plug-in transformer (21 VA), threaded connection to

ANSI B1.20.1., 3 prong duplex box outlet with GFI required. Run backwash flush-

ing drain connection to the nearest hub drain using an indirect connection.

JUDO PROFIMAT-AT 3⁄4" - 11⁄4"

Type JPF-AT 3⁄4" - 11⁄4"

Automatic version, time controlled

Model JPF-AT JPF-AT JPF-AT

Pipe Size 3⁄4" 1" 11⁄4"

Max. fl ow rate m3

/h (gpm) 4 (17.5) 4.5 (20) 5.5 (24)

Min./Max. operating pressure psi (kPa) 22 - 232 (150 - 1600) 22 - 232 (150 - 1600) 22 - 232 (150 - 1600)

Pressure loss aft er backwash psi (kPa) 2.9 (20) 2.9 (20) 2.9 (20)

Standard mesh size mm (microns) 0.1 (100) 0.1 (100) 0.1 (100)

Maximum ambient temperature °C (°F) 30 (86) 30 (86) 30 (86)

Maximum water temparature °C (°F) 30 (86) 30 (86) 30 (86)

Weight approximate kg (lbs) 4.2 (9.3) 4.4 (9.7) 4.9 (10.8)

Order No. 8020218 8020219 8020268

Backwash protective filter for cold water application up to max. 30 °C (86 °F),

approved to German standards and CSA, NSF 61 approval.

For the filtration of all rough and finer physical impurities in the water supply

which may lead to pitting and/or other corrosive activities in the piping system

and cause disfunctions to control and regulating elements.